Initial Commit

.abcde.conf

@@ -0,0 +1,103 @@
+# -----------------$HOME/.abcde.conf----------------- #
+# 
+#  configuration file to convert music cds to mp3s
+# 
+#  dependencies not installed with apt-get install abcde
+#    - eyeD3 (req)
+#    - normalize-audio (optional)
+#
+# --------------------------------------------------- #
+#
+# Check for installed software
+# CD Paranoia
+if [ ! "$(command -v cdparanoia)" ]; then
+    echo "CD Paranoia not found.  Exiting."
+    exit 1
+fi
+# CD-DiscID
+if [ ! "$(command -v cd-discid)" ]; then
+    echo "CD-DiscID not found.  Exiting"
+    exit 1
+fi
+# LAME Encoder
+if [ ! "$(command -v lame)" ]; then
+    echo "LAME Encoder not found.  Exiting"
+    exit 1
+fi
+# eyeD3
+if [ ! "$(command -v eyeD3)" ];then 
+    echo "Eye3D not found. Exiting"
+    exit 1
+fi
+# Normalize-audio
+if [ "$(command -v normalize-audio)" ]; then
+    NORMALIZERSYNTAX='default'
+else
+    echo "Normalize-Audio not found.  Proceeding anyway."
+fi
+
+# Specify the encoder to use for MP3. In this case
+# the alternatives are gogo, bladeenc, l3enc, xingmp3enc, mp3enc.
+MP3ENCODERSYNTAX=lame 
+# Specify the path to the selected encoder. In most cases the encoder
+# should be in your $PATH as I illustrate below, otherwise you will 
+# need to specify the full path. For example: /usr/bin/lame
+LAME=lame
+
+# Specify your required encoding options here. Multiple options can
+# be selected as '--preset standard --another-option' etc.
+LAMEOPTS='--preset standard' 
+# Output type for MP3.
+OUTPUTTYPE="mp3"
+
+# The cd ripping program to use. There are a few choices here: cdda2wav,
+# dagrab, cddafs (Mac OS X only) and flac.
+CDROMREADERSYNTAX=cdparanoia            
+                                     
+# Give the location of the ripping program and pass any extra options:
+CDPARANOIA=cdparanoia  
+CDPARANOIAOPTS="--never-skip=40"
+
+# Give the location of the CD identification program:       
+CDDISCID=cd-discid            
+                               
+# Give the base location here for the encoded music files.
+OUTPUTDIR="$HOME/Music/"               
+if [ -d "${OUTPUTDIR}" ]; then
+    echo "creating destination ${OUTPUTDIR}"
+fi
+
+# The default actions that abcde will take.
+if [ -z ${NORMALIZERSYNTAX+x} ]; then
+    ACTIONS=cddb,playlist,read,encode,tag,move,clean
+else
+    ACTIONS=cddb,playlist,read,encode,normalize,tag,move,clean
+fi
+              
+# Decide here how you want the tracks labelled for a standard 'single-artist',
+# multi-track encode and also for a multi-track, 'various-artist' encode:
+OUTPUTFORMAT='${ARTISTFILE} - ${YEAR} - ${ALBUMFILE}/${ARTISTFILE} - ${TRACKNUM} - ${TRACKFILE}'
+VAOUTPUTFORMAT='${ALBUMFILE} - (${YEAR})/${TRACKNUM} - ${ARTISTFILE} - ${TRACKFILE}'
+
+# Decide here how you want the tracks labelled for a standard 'single-artist',
+# single-track encode and also for a single-track 'various-artist' encode.
+# (Create a single-track encode with 'abcde -1' from the commandline.)
+ONETRACKOUTPUTFORMAT='${ARTISTFILE} - ${TRACKFILE}'
+VAONETRACKOUTPUTFORMAT='${ALBUMFILE}- ${TRACKFILE}'
+
+# Create playlists for single and various-artist encodes. I would suggest
+# commenting these out for single-track encoding.
+PLAYLISTFORMAT='${ARTISTFILE} - ${YEAR} - ${ALBUMFILE}/${ARTISTFILE} - ${YEAR} - ${ALBUMFILE}.m3u'
+VAPLAYLISTFORMAT='${ALBUMFILE}/${ALBUMFILE} - ${YEAR}.m3u'
+
+# Put spaces in the filenames instead of the more correct underscores:
+mungefilename ()
+{
+      echo "$@" | sed s,:,-,g | tr / _ | tr -d \'\"\?\[:cntrl:\]
+}
+
+# What extra options?
+MAXPROCS=2                              # Run a few encoders simultaneously
+PADTRACKS=y                             # Makes tracks 01 02 not 1 2
+EXTRAVERBOSE=y                          # Useful for debugging
+EJECTCD=y                               # Please eject cd when finished :-)

.conkyrc

@@ -0,0 +1,79 @@
+conky.config = {
+	font = 'Hack:size=10',
+	default_color = '#ffffff',
+
+	use_xft = true,
+	alignment = 'top_right',
+
+	own_window_class = 'Conky',
+	own_window = true,
+	own_window_argb_visual = true,
+	own_window_type = 'normal',
+	own_window_transparent = true,
+	own_window_hints = 'undecorated,below,sticky,skip_taskbar,skip_pager',
+
+	xftalpha = 0.8,
+	double_buffer = true,
+	draw_shades = false,
+	draw_outline = false,
+	draw_borders = false,
+	stippled_borders = 10,
+	border_margin = '1',
+	border_width = 1,
+	default_shade_color = 'grey',
+	default_outline_color = 'black',
+	use_spacer = 'none',
+	no_buffers = true,
+	uppercase = false,
+
+-- gap_x 1425
+-- gap_y 25
+
+	color1 = '#779977',
+	color2 = '#9933CC',
+	color3 = '#669900',
+	color4 = '#FF8800',
+	color5 = '#CCCCCC',
+	color6 = '#AAAAAA',
+	color7 = '#DDDDDD',
+
+};
+
+conky.text = [[
+NETWORK  ${hr}
+${color1}LAN${color0}${alignr}${addr enp0s25}
+${color1}WLAN${color0}${alignr}${addr wlp12s0}
+${color1}SSID${color0}${alignr}${wireless_essid wlp12s0}
+${color1}Public${color0}${alignr}${execi 3600 wget -q -O /dev/stdout http://checkip.dyndns.org/ | cut -d : -f 2- | cut -d \< -f -1}
+
+FILE SYSTEM  ${hr}
+${color1}${fs_bar 22 /home}
+${color7}${voffset -25}${offset 5}${color7}ROOT${alignr 5}$color${fs_free /}
+${color1}${fs_bar 22 /}
+${color7}${voffset -25}${offset 5}${color7}HOME${alignr 5}$color${fs_free /home}
+#${color1}${fs_bar 22 /mnt/media}
+#${color7}${voffset -25}${offset 5}${color7}MEDIA${alignr 5}$color${fs_free /mnt/media}
+
+STATS  ${hr}
+${color1}Uptime${color0}   ${alignr}${uptime_short}
+${color1}Battery${color0}  ${alignr}${battery}${alignc}
+${color1}${membar 22}
+${color7}${voffset -25}${offset 5}${color7}MEM${alignr 5} 
+${color1}${cpubar 22 cpu0}
+${color7}${voffset -25}${offset 5}${color7}CPU0${alignr 5} 
+${color1}${cpubar 22 cpu1}
+${color7}${voffset -25}${offset 5}${color7}CPU1${alignr 5}
+
+PROCESSES  ${hr}
+NAME $alignr PID    CPU
+${top name 1} $alignr ${top pid 1} ${top cpu 1}
+${top name 2} $alignr ${top pid 2} ${top cpu 2}
+${top name 3} $alignr ${top pid 3} ${top cpu 3}
+${top name 4} $alignr ${top pid 4} ${top cpu 4}
+${top name 5} $alignr ${top pid 5} ${top cpu 5}
+
+${color1}System Temperature${color0} $alignr${hwmon temp 1}°c
+${voffset -20}
+
+
+]];

.crawlrc

@@ -0,0 +1,71 @@
+tile_full_screen = false
+
+#############
+# Autofight #
+#############
+
+# Don't throw stuff for no reason
+autofight_throw = true
+autofight_throw_nomove = true
+
+# Prevent me from tab-fighting to death below 50% HP
+autofight_stop = 50
+
+##############
+# Autopickup #
+##############
+
+# Used
+# $ = gold
+# ? = scroll
+# ! = potion
+# : = book
+# " = amulet
+# / = wand
+# % = food
+# | = staves and rods
+autopickup += $?!:"/%|
+
+# Unused
+# ) = weapon
+# ( = missiles
+# [ = armour
+# } = miscellaneous
+
+# Secondary Armour Auto-Pickup
+{
+add_autopickup_func(function(item, name)
+	if item.class(true) == "armour" then	
+		local good_slots = {cloak="Cloak", helmet="Helmet", gloves="Gloves", boots="Boots"}
+		sub_type, _ = item.subtype()
+			 
+		if (good_slots[sub_type] ~= nil) and (items.equipped_at(good_slots[sub_type]) == nil) then 
+			return true 
+		end
+		
+		return false		
+		end	
+	end)
+}
+
+drop_mode += multi
+pickup_mode += multi
+default_friendly_pickup += all
+
+##########
+# Travel #
+##########
+
+# Set travel delay to -1 for instant-travel, leaving it at 1 to see travel paths currently
+travel_delay = 1
+show_travel_trail = true
+
+explore_stop = items,greedy_items,greedy_pickup,greedy_pickup_gold
+explore_stop += greedy_visited_item_stack,stairs,shops,altars,gates
+explore_stop += greedy_sacrificeable
+
+trapwalk_safe_hp = dart:20,needle:25,arrow:25,bolt:30,spear:20,axe:40,blade:50
+
+runrest_ignore_poison = 2:10
+runrest_ignore_monster += butterfly:1
+

.dosbox/dosbox-0.74.conf

@@ -0,0 +1,243 @@
+# This is the configurationfile for DOSBox 0.74. (Please use the latest version of DOSBox)
+# Lines starting with a # are commentlines and are ignored by DOSBox.
+# They are used to (briefly) document the effect of each option.
+
+[sdl]
+#       fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
+#       fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.
+#   fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
+#                     Using your monitor's native resolution with aspect=true might give the best results.
+#                     If you end up with small window on a large screen, try an output different from surface.
+# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
+#                     (output=surface does not!)
+#           output: What video system to use for output.
+#                   Possible values: surface, overlay, opengl, openglnb.
+#         autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
+#      sensitivity: Mouse sensitivity.
+#      waitonerror: Wait before closing the console if dosbox has an error.
+#         priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
+#                     pause is only valid for the second entry.
+#                   Possible values: lowest, lower, normal, higher, highest, pause.
+#       mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the defaul value.
+#     usescancodes: Avoid usage of symkeys, might not work on all operating systems.
+
+fullscreen=false
+fulldouble=false
+fullresolution=original
+windowresolution=1024x576
+output=overlay
+autolock=true
+sensitivity=100
+waitonerror=true
+priority=higher,normal
+mapperfile=mapper-0.74.map
+usescancodes=true
+
+[dosbox]
+# language: Select another language file.
+#  machine: The type of machine tries to emulate.
+#           Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
+# captures: Directory where things like wave, midi, screenshot get captured.
+#  memsize: Amount of memory DOSBox has in megabytes.
+#             This value is best left at its default to avoid problems with some games,
+#             though few games might require a higher value.
+#             There is generally no speed advantage when raising this value.
+
+language=
+machine=svga_s3
+captures=capture
+memsize=16
+
+[render]
+# frameskip: How many frames DOSBox skips before drawing one.
+#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.
+#    scaler: Scaler used to enlarge/enhance low resolution modes.
+#              If 'forced' is appended, then the scaler will be used even if the result might not be desired.
+#            Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.
+
+frameskip=0
+aspect=true
+scaler=normal2x
+
+[cpu]
+#      core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
+#            Possible values: auto, dynamic, normal, simple.
+#   cputype: CPU Type used in emulation. auto is the fastest choice.
+#            Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
+#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.
+#            Setting this value too high results in sound dropouts and lags.
+#            Cycles can be set in 3 ways:
+#              'auto'          tries to guess what a game needs.
+#                              It usually works, but can fail for certain games.
+#              'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
+#                              (Example: fixed 4000).
+#              'max'           will allocate as much cycles as your computer is able to handle.
+#            
+#            Possible values: auto, fixed, max.
+#   cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)
+# cycledown: Setting it lower than 100 will be a percentage.
+
+core=auto
+cputype=auto
+cycles=auto
+cycleup=10
+cycledown=20
+
+[mixer]
+#   nosound: Enable silent mode, sound is still emulated though.
+#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
+#            Possible values: 1024, 2048, 4096, 8192, 512, 256.
+# prebuffer: How many milliseconds of data to keep on top of the blocksize.
+
+nosound=false
+rate=44100
+blocksize=1024
+prebuffer=20
+
+[midi]
+#     mpu401: Type of MPU-401 to emulate.
+#             Possible values: intelligent, uart, none.
+# mididevice: Device that will receive the MIDI data from MPU-401.
+#             Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
+# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
+#               See the README/Manual for more details.
+
+mpu401=intelligent
+mididevice=default
+midiconfig=
+
+[sblaster]
+#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
+#          Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
+#  sbbase: The IO address of the soundblaster.
+#          Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
+#     irq: The IRQ number of the soundblaster.
+#          Possible values: 7, 5, 3, 9, 10, 11, 12.
+#     dma: The DMA number of the soundblaster.
+#          Possible values: 1, 5, 0, 3, 6, 7.
+#    hdma: The High DMA number of the soundblaster.
+#          Possible values: 1, 5, 0, 3, 6, 7.
+# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
+# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
+#          Possible values: auto, cms, opl2, dualopl2, opl3, none.
+#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
+#          Possible values: default, compat, fast.
+# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
+#          Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
+
+sbtype=sb16
+sbbase=220
+irq=7
+dma=1
+hdma=5
+sbmixer=true
+oplmode=auto
+oplemu=default
+oplrate=44100
+
+[gus]
+#      gus: Enable the Gravis Ultrasound emulation.
+#  gusrate: Sample rate of Ultrasound emulation.
+#           Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#  gusbase: The IO base address of the Gravis Ultrasound.
+#           Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
+#   gusirq: The IRQ number of the Gravis Ultrasound.
+#           Possible values: 5, 3, 7, 9, 10, 11, 12.
+#   gusdma: The DMA channel of the Gravis Ultrasound.
+#           Possible values: 3, 0, 1, 5, 6, 7.
+# ultradir: Path to Ultrasound directory. In this directory
+#           there should be a MIDI directory that contains
+#           the patch files for GUS playback. Patch sets used
+#           with Timidity should work fine.
+
+gus=false
+gusrate=44100
+gusbase=240
+gusirq=5
+gusdma=3
+ultradir=C:\ULTRASND
+
+[speaker]
+# pcspeaker: Enable PC-Speaker emulation.
+#    pcrate: Sample rate of the PC-Speaker sound generation.
+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#     tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
+#            Possible values: auto, on, off.
+# tandyrate: Sample rate of the Tandy 3-Voice generation.
+#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
+
+pcspeaker=true
+pcrate=44100
+tandy=auto
+tandyrate=44100
+disney=true
+
+[joystick]
+# joysticktype: Type of joystick to emulate: auto (default), none,
+#               2axis (supports two joysticks),
+#               4axis (supports one joystick, first joystick used),
+#               4axis_2 (supports one joystick, second joystick used),
+#               fcs (Thrustmaster), ch (CH Flightstick).
+#               none disables joystick emulation.
+#               auto chooses emulation depending on real joystick(s).
+#               (Remember to reset dosbox's mapperfile if you saved it earlier)
+#               Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
+#        timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
+#     autofire: continuously fires as long as you keep the button pressed.
+#       swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
+#   buttonwrap: enable button wrapping at the number of emulated buttons.
+
+joysticktype=auto
+timed=true
+autofire=false
+swap34=false
+buttonwrap=false
+
+[serial]
+# serial1: set type of device connected to com port.
+#          Can be disabled, dummy, modem, nullmodem, directserial.
+#          Additional parameters must be in the same line in the form of
+#          parameter:value. Parameter for all types is irq (optional).
+#          for directserial: realport (required), rxdelay (optional).
+#                           (realport:COM1 realport:ttyS0).
+#          for modem: listenport (optional).
+#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
+#                         transparent, port, inhsocket (all optional).
+#          Example: serial1=modem listenport:5000
+#          Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial2: see serial1
+#          Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial3: see serial1
+#          Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial4: see serial1
+#          Possible values: dummy, disabled, modem, nullmodem, directserial.
+
+serial1=dummy
+serial2=dummy
+serial3=disabled
+serial4=disabled
+
+[dos]
+#            xms: Enable XMS support.
+#            ems: Enable EMS support.
+#            umb: Enable UMB support.
+# keyboardlayout: Language code of the keyboard layout (or none).
+
+xms=true
+ems=true
+umb=true
+keyboardlayout=auto
+
+[ipx]
+# ipx: Enable ipx over UDP/IP emulation.
+
+ipx=false
+
+[autoexec]
+# Lines in this section will be run at startup.
+# You can put your MOUNT lines here.
+
+mount c /home/chawley/Games/dosbox

.elinks/.gitignore

@@ -0,0 +1,3 @@
+cookies
+globhist
+gotohist

.elinks/bookmarks

@@ -0,0 +1,2 @@
+Castlerock Notebook	http://castlerock.planethawleywood.com/~chuck/notebook/	0	
+Auto saved session		0	F

.elinks/elinks.conf

@@ -0,0 +1,59 @@
+## ELinks configuration file
+## See elinks.conf(5) and the output of "elinks -config-dump" for a list
+## of all the supported options, their possible values and the defaults.
+
+    ## protocol.http.user_agent <str>
+    #  Change the User Agent ID. That means identification string, which
+    #  is sent to HTTP server when a document is requested. The 'textmode'
+    #  token in the first field is our silent attempt to establish this as
+    #  a standard for new textmode user agents, so that the webmasters can
+    #  have just a single uniform test for these if they are ie. pushing
+    #  some lite version to them automagically.
+    #  0.12~pre6-4ubuntu1 in the string means ELinks version
+    #  %s in the string means system identification
+    #  %t in the string means size of the terminal
+    #  %b in the string means number of bars displayed by ELinks
+    #  Use " " if you don't want any User-Agent header to be sent at all.
+set protocol.http.user_agent = "ELinks/0.12~pre6-4ubuntu1 (textmode; Ubuntu; %s; %t-%b)"
+
+set document.browse.links.numbering = 1
+
+bind "main" "g" = "move-document-start"
+bind "main" "G" = "move-document-end"
+bind "main" "J" = "history-move-back"
+bind "main" "K" = "history-move-forward"
+bind "main" "O" = "options-manager"
+bind "main" "Tab" = "move-link-next"
+bind "main" "h" = "move-link-left"
+bind "main" "j" = "move-link-down"
+bind "main" "k" = "move-link-up"
+bind "main" "l" = "move-link-right"
+bind "main" "o" = "goto-url"
+bind "main" "b" = "add-bookmark"
+bind "main" "B" = "bookmark-manager"
+bind "main" "f" = "find-next"
+bind "main" "F" = "find-next-back"
+set document.browse.accesskey.display = 1
+set document.browse.accesskey.priority = 2
+set document.browse.forms.auto_submit = 1
+set document.browse.forms.confirm_submit = 0
+set document.browse.forms.insert_mode = 0
+set document.browse.links.numbering = 1
+set document.browse.links.use_tabindex = 1
+set document.colors.use_document_colors = 2
+set terminal.xterm-256color.colors = 3
+
+set ui.colors.color.mainmenu.selected.background = "yellow"
+set ui.colors.color.menu.hotkey.selected.background = "yellow"
+set ui.colors.color.menu.selected.background = "yellow"
+set ui.colors.color.tabs.loading.background = "red"
+set ui.colors.color.tabs.normal.background = "white"
+set ui.colors.color.tabs.selected.background = "yellow"
+set ui.colors.color.tabs.unvisited.background = "white"
+set ui.dialogs.underline_button_shortcuts = 1
+set ui.language = "System"
+set ui.sessions.auto_save = 1
+set ui.sessions.homepage = ""
+set ui.show_title_bar = 0
+set ui.startup_goto_dialog = 1
+set ui.tabs.top = 1